OPERATING THE CD LOADING TRAY
To open the CD loading tray, just press the EJECT button. After in-
serting or removing a disc, press the EJECT button again or gently
push on the open disc tray, the tray will automatically close.
If you are loading a disc in a XM-6401B drive that has been mounted
vertically, perform the following procedures:
1. The disc holders (4 locations) are fixed by four projections.
2. Position the disc at the bottom disc holders until it catches. It's
okay if the disc is not secured by the top disc holders.
3. Close the drive by gently pushing in the tray or pressing the eject
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive
CD Loading Tray