Asus VivoPC VM40B User Manual page 24

9. Attach the black screws with rubber heads into the screw holes
on the Serial ATA HDD.
10. Position the Serial ATA HDD on top of the drive bay to an
orientation where the HDD's SATA connectors are aligned to the
SATA connector in the VivoPC drive bay.
11. Match the rubber heads of the black screws with the four screw
slots on the drive bay.
12. Carefully, place the Serial ATA HDD into the drive bay, then slide
the drive towards the SATA connector.
SATA connector
Rubber head screw slot
Rubber head screw slot
VivoPC VM40B
24
Rubber head screw slot