Using A Wall-Mount Bracket - Sony BRAVIA XBR-55X900A Operating Instructions Manual
Hide thumbs
Also See for BRAVIA XBR-55X900A:
- Operating instructions manual (36 pages) ,
- Using manual (32 pages) ,
- Manual (21 pages)
Table of Contents
Advertisement
Using a Wall-Mount
Bracket
Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of the
box as packaged.
If the Table-Top Stand is
attached to the TV, the TV may require
detaching the Table-Top Stand; see
page 11 (Detaching the Table-Top Stand
from the TV).
For product protection and safety
reasons, Sony strongly recommends that
you use the Wall-Mount Bracket designed
for your TV and the installation should be
performed by a Sony dealer or licensed
contractor.
•
See page 36 (Compatible
Wall-Mount
Bracket Information) (XBR-55X900A
only).
•
Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV's weight.
•
Be sure to use the screws supplied with
the Wall-Mount Bracket when attaching
the mounting hooks to the TV set.
The supplied screws are designed
as
indicated by illustration when measured
from the attaching surface of the
mounting hook.
The diameter and length of the screws
differ depending
on the Wall-Mount
Bracket model. Use of screws other than
those supplied may result in internal
damage to the TV set or cause it to fall,
etc.
8-12 mm
Screw
Mounting Hook
Hook attachment on rear of
TV set
Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
• Read the supplied Safety Booklet for
additional safety information.
Page 22
Advertisement
Table of Contents
