Installing The Coffee Maker; Description Of Parts; Control Panel - Gaggia Titanium SUP027YDR Operating Instructions Manual

Gaggia espresso machine operating instructions
Hide thumbs Also See for Titanium SUP027YDR:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 24
ENGLISH
DEscRIPTIoN of PARTs
See Fig.01
1
Coffee bean container
2
Coffee bean container cover (aroma preserver)
3
Grinding control knob
4
Dose control knob
5
Ground coffee doser cover
6
Cup Heater
7
ON-OFF switch
8
Water tank cover
9
Water tank
10
Coffee grounds drawer
11
Power cord
12
Drip tray + plate
13
Height adjustable coffee dispenser
14
Steam / hot water nozzle and pipe
15
Front cover
16
Steam knob
17
Coffee dispenser
18

Control panel

19
Full tray warning indicator
20
Cleaning brush
21
Ground coffee measuring scoop
control panel
22
Espresso coffee selector button /
Page up in programming mode
23
Normal coffee selector button /
Page down in programming mode
24
“Caffe lungo” selector button /
ESC in the programming mode
25
Ground coffee selector button
26
Hot water selector button
27
Descaling selector button
28
Programming button /
“OK” in the programming mode
29
LCD display
•  •
4
INsTALLINg ThE coffEE mAKER
For your own safety and the safety of others, follow the “Safety
Rules” (see chapter 3).
4.1 Packaging
The original packaging was designed and made to protect the appliance
during shipment.
We recommend you keep it for future needs.
4.2 Preliminaries
• Remove the coffee maker from the packaging and position it in a
suitable location that meets the requirements specified and described
in the safety rules (chap.3).
• Open the machine door, take the drip tray (12) from the package,
and fit the dregs box (10); then, fit the drip tray in the machine
(Fig.21).
• Make sure that the drip tray and plate (Fig.01, pos. 12), the coffee
grounds drawer (10) and the coffee dispenser (17) are fitted correctly
and that the front cover (15) is closed.
• Keep the cleaning brush (20) and the ground coffee measuring
scoop (21) supplied with the appliance within easy reach.
If the display signals a fault when you switch on the
machine, it means that one of the above-described
components has not been properly positioned (Par.16).
4.3 Preparing the coffee maker for use
• Open the water tank cover (Fig.02) and remove the tank (Fig.03).
Rinse and fill with fresh potable water (Fig.04); we recommend that
you do not exceed the “MAX” level mark. Replace the water tank in
its housing and reposition the cover on top.
Always fill the tank (9) with fresh still water. Hot water
and other liquids can damage the tank and/or the
appliance. Do not operate the appliance without water: make
sure that there is enough water inside the tank.
• Lift the cover (Fig.05) and fill the container with coffee beans
(Fig.06).
Use coffee beans only. Ground and instant coffee, as well
as other items, will cause damage to the appliance.
• Set the cover back in place on the coffee container (1).
• Insert the plug into the outlet on the back of the coffee machine (Fig.07)
after making sure that the on/off switch (7) is set on “O”.
Insert the plug on the other end of the cord into a suitable wall
outlet.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents