Download  Print this page

Displaying The Monitor Status Page - Sony BVMF170A Operation Manual

Professional video monitor.
Hide thumbs

Advertisement

Displaying the Monitor
Status Page
When Status has been assigned to a function button of the
controller, the setting status, display mode and input signal
information of the currently displayed video signal are
displayed on the monitor status pages.
For how to assign a function to a function button, see
"Assigning a Function to a Function Button" (page 101).
Notes
• To assign Status to a function button of the controller,
use the controller with software version 1.6 or higher.
• Pixel Zoom is not set to on when the monitor status page
is displayed.
1
Press the Status button on the controller to set it to On.
Page 1/3 of STATUS display is displayed.
2
Select the STATUS page you wish to view using the
UP/DOWN button on the controller.
You can select the page from among 1/3, 2/3 and 3/3.
For the contents of each page, see below.
To cancel the display of the STATUS page
Press the Status button on the controller again.
Page 1/3
Information on the setting status of the input signal and the
display mode is displayed.
STATUS (Input / Display Mode)
CH:
01 "PROG1"
Detected Signal:
1080/60I
Format:
4:4:4 RGB 10bit
Input Por t:
Option1/Input1
RGB Range:
Limited
1080I/PsF:
1080I
Scan Mode:
Native Aspect Correct
Aspect Mode:
16:9
Interlace Display:
ON
CH: Displays the currently selected channel number and
channel name.
Detected Signal: Displays the signal system whose format
is detected.
Format: Displays Format set in the Channel
Configuration menu.
v
1/3
V
Input Port: Displays Input Port and Input No. set in the
Channel Configuration menu.
RGB Range: Displays RGB Range set in the Channel
Configuration menu.
1080I/PsF: Displays 1080I/PsF set in the Channel
Configuration menu.
Scan Mode: Displays the selected scan mode.
Aspect Mode: Displays the selected aspect ratio.
Interlace Display: Displays On/Off of the interlace
display.
Page 2/3
Information on the picture adjustments is displayed.
S
TATUS (Picture Configuration)
CH01
Color Profile:
BVM EBU
Color Space:
EBU
Gamma:
CRT BVM
Color Temp:
User1
Picture Preset:
Preset1
Chroma:
1000
Bright:
000
Contrast:
1000
Matrix:
ITU-R BT.709
Color Profile: Displays Color Profile set in the Channel
Configuration menu.
Color Space: Displays Color Space set in Color Profile
Gamma: Displays Gamma set in Color Profile
Color Temp: Displays Color Temp set in the Channel
Configuration menu.
Picture Preset: Displays Picture Preset set in the Channel
Configuration menu.
Chroma: Displays the Chroma value of the selected
Picture Preset.
Bright: Displays the Bright value of the selected Picture
Preset.
Contrast: Displays the Contrast value of the selected
Picture Preset.
Matrix: Displays Matrix set in the Channel Configuration
menu.
Page 3/3
When the SDI signal is input
The same information as that of SDI Payload ID Status in
the System Status menu is displayed.
v
2/3
V

Displaying the Monitor Status Page

99

Advertisement

Table of Contents

   Also See for Sony BVMF170A

   Related Manuals for Sony BVMF170A

Comments to this Manuals

Symbols: 0
Latest comments: