Download  Print this page

Sony BVMF170A Operation Manual Page 81

Professional video monitor.
Hide thumbs

Advertisement

Menu
SDI Payload ID Status
HDMI/DP Status
Model Name
Serial No
Software Version
Operation Time
Panel On Time
Network Switch
Controller Status
Model Name
Serial No
Software Version
Network Switch
Function and operation ([
Displays the information of the Payload ID data superimposed on the SDI signal and current
signal status of the monitor.
When the option port number in which the BKM-250TG is installed is selected in Input Port of
the Channel Configuration menu, the following is displayed.
OptionX/InputX: Input port and input connector of the displayed information
Standard or Option1 to 4 is displayed as an input port, and Input1 or Input2 is displayed
as an input connector.
Payload ID: XX XX XX XX (4-byte data for Payload ID of the SMPTE-352M standard)
Displays the 4-byte data in hexadecimal in sequence of Byte 1, Byte 2, Byte 3 and
Byte 4.
When the Payload ID information is not set, only Current Status is displayed and "---" is
displayed for other items. When the following information is not decoded, Unknown is
displayed.
Video Standard: Decode display of Byte 1_Bit 6-0 (SD-SDI/HD-SDI/3G-SDI/Dual
Link HD-SDI, etc.)
Sampling Structure: Decode display of Byte 3_Bit 3-0 (4:2:2 Y/Cb/Cr / 4:4:4 Y/Cb/
Cr / 4:4:4 G/B/R, etc.)
Bit Depth: Decode display of Byte 4_Bit 1-0 (8bit/10bit/12bit)
Picture Rate: Decode display of Byte 2_Bit 3-0 (23.98/24/25/29.97/30/50/59.94/60)
Scanning Method: Decode display of Byte 2_Bit 7/decode display of Byte 2_Bit 6
(Interlace/Progressive, Progressive/Progressive, etc.)
Link Number: Decode display of Byte 4_Bit 7-6 (Single/Link_1 / Link_2 / Link_3 /
Link_4)
Current Status: Current status of the monitor
Format: Displayed as "Video Standard + Sampling Structure + Bit Depth"
Video Standard: 3G/DL/HD/SD
Sampling Structure: 422 YCbCr/444 YCbCr/ 444 RGB
Bit Depth: 10/12
I/PsF/P: Interlace/PsF/Progressive
You can confirm the same information using the Status button on the controller. For details,
see "Displaying the Monitor Status Page" (page 99).
Displays the signal information of the HDMI or DisplayPort signal.
Pixel Encoding: RGB 4:4:4/YCbCr 4:4:4/YCbCr 4:2:2
Color Depth: 8bit/10bit/12bit (HDMI signal), or 6bit/8bit/10bit/12bit (DisplayPort signal)
Matrix: ITU-R BT.601/ITU-R BT.709
RGB Range: Limit/Full
Notes
• When HDMI/DisplayPort Auto is set to On in the Matrix menu of the Channel Configuration
menu, the Matrix status is displayed.
• When HDMI/DisplayPort Auto is set to On in the RGB Range menu of the Channel
Configuration menu, the RGB Range status is displayed.
You can confirm the same information using the Status button on the controller. For details,
see "Displaying the Monitor Status Page" (page 99).
Displays the model name of the monitor.
Displays the serial number of the monitor.
Displays software version of the monitor.
Displays operation time (hours, in total) of the monitor.
Displays brighten time (hours, in total) of the panel.
Displays the NETWORK switch setting.
Displays information on the controller.
Displays the model name.
Displays the serial number.
Displays software version.
Displays the NETWORK switch setting.
]: factory setting)
81
System Status Menu

Advertisement

Table of Contents

   Also See for Sony BVMF170A

   Related Manuals for Sony BVMF170A

Comments to this Manuals

Symbols: 0
Latest comments: