Download  Print this page

Sony BVMF170A Operation Manual Page 68

Professional video monitor.
Hide thumbs

Advertisement

Menu
Comb
Aperture
Mono
Blue Only
R Off
G Off
B Off
Chroma Up
Interlace
Marker
Aspect Marker
68
Function Setting Menu
Function and operation ([
Sets whether or not to use the comb filter (Off or [On]).
When Off is selected, the trap · band-pass filter (Trap/BPF) is selected.
You can select the type of comb filter in NTSC Comb Filter menu (page 62) of the Auxiliary
Setting menu.
Notes
• When Composite is set to Auto, NTSC, PAL or PAL-M in Format of the Channel
Configuration menu, you can set the comb filter.
• The comb filter is not set in the following cases:
– When the internal signal is displayed
– When the captured frame is displayed
Sets whether or not to function the aperture modification (Off or On).
[Off] (when the signal is displayed in Aspect Correction mode of the native display), [On]
(when the signal is displayed in mode other than Aspect Correction of the native display)
Note
When the HDMI/DisplayPort computer signal is input, the aperture modification does not
function.
Sets whether or not to display in monochrome mode ([Off] or On).
Sets whether or not to display only the blue signal as a monochrome picture after cutting the
red and green signals ([Off] or On).
Sets whether or not to cut the red signal ([Off] or On).
Sets whether or not to cut the green signal ([Off] or On).
Sets whether or not to cut the blue signal ([Off] or On).
Sets whether or not to increase the chroma value by 12 dB ([Off] or On).
Note
The chroma value is not increased in the following cases:
• When the signal to be displayed is RGB
• When the composite signal is automatically displayed in monochrome depending on the
color discrimination of the input adaptor
• When the internal signal is displayed
Sets whether or not to display in interlace mode ([Off] or On).
Notes
• Set Native Scan to On for the interlace display.
• The picture is not displayed in interlace mode in the following cases:
– When Side by Side is set to On
– When Pixel Zoom is set to on
For details of this menu, see "Selecting Display Mode" on page 88.
Sets whether or not to display all markers ([Off] or On).
Notes
• The marker is not displayed in the following cases:
– When the input signal has no sync signal
– When the internal signal is displayed
– When the HDMI/DisplayPort computer signal is input
– When H Delay/V Delay is set to On
– When Side by Side is set to On
– When Pixel Zoom is set to on
• The marker may be displayed in an incorrect position when External Sync is On.
Sets whether or not to display the aspect marker ([Off] or On).
Notes
• The aspect marker is not displayed in the following cases:
– When the input signal has no sync signal
– When the internal signal is displayed
– When the HDMI/DisplayPort computer signal is input
– When H Delay/V Delay is set to On
– When Side by Side is set to On
– When Pixel Zoom is set to on
• The aspect marker may be displayed in an incorrect position when External Sync is On.
]: factory setting)

Advertisement

Table of Contents

   Also See for Sony BVMF170A

   Related Manuals for Sony BVMF170A

Comments to this Manuals

Symbols: 0
Latest comments: