Color Profile (BVM-F250A)
Channel Configuration Menu
Function and operation ([
Sets the color temperature.
You can select from D93, D65, User1 to User5.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
Note on color temperature adjustment
If you measure the color temperatures of different display types, such as CRT, LCD, or OLED,
by using a common (or general) color analyzer that is based on CIE 1931, and adjust the xy
chromaticity to the same value, the appearance may be different because of optical spectrum
To compensate for this difference, the D93, D65 and User1 to User5 settings of the monitor
are adjusted by an offset*.
* The offset value applied (x-0.006, y-0.011) is based on the Judd's function to the CIE 1931 (x, y) value.
Sets the picture adjustment preset.
Select from Preset1 to Preset5.
Sets Matrix data (transmission matrix) depending on the input signal format.
Three transmission matrix data are preset.
ITU-R BT.709: Select when the signal of the ITU-R BT.709 standards format is input.
ITU-R BT.601: Select when the signal of the ITU-R BT.601 standards format is input.
SMPTE 240M: Select when the signal of the SMPTE 240M standards format is input.
The Matrix data can be selected for the HD or SD input signal, respectively.
For the type of the input signal, see "Available Signal Formats" (page 113).
Sets Matrix of the HD signal.
You can select from [ITU-R BT.709], ITU-R BT.601 or SMPTE 240M.
Sets Matrix of the SD signal.
You can select from ITU-R BT.709, [ITU-R BT.601], SMPTE 240M.
Sets the manual or automatic setting for the transmission matrix of the HDMI or DisplayPort
Off: Select to use Matrix set in the HD or SD menu.
[On]: Select to set Matrix automatically according to the input signal.
As the monitor is equipped with a wider color space OLED panel, the signal can be displayed
with the color space and gamma selected in the Color Profile menu.
Sets the color profile (color space and gamma) to be used.
There are four Color Profile data items in which the color space and gamma have been
preset and user channel data item in which Color Space (color space) and Gamma (gamma)
can be selected for each individual channel.
Preset data: BVM SMPTE-C, BVM EBU, ITU-R BT.709, F250 Native
Selectable data: User CHXX (the currently selected channel number is displayed)
Select above four
types in Color Space
menu (page 59)
]: factory setting)
Select above three types
in Gamma menu (page