• When an optional LAN cable is connected, use a
shielded-type cable to prevent a malfunction due to
• We recommend to use an optional switching hub
with auto selection function (AUTO MDI/MDI-X)
of a straight/cross cable.
Connect the output cable on the AC adaptor supplied
with controller to the DC 5V/12V IN connector of the
When the multiple units are connected, set for the LAN
before setting the NETWORK switch to LAN (page
Set the NETWORK switches of each monitor and the
controller to LAN.
Note on connecting the cable to the DC 5V OUT
Be sure to plug the male connector of the cable into the DC
5V OUT connector of the monitor.
Insert the connector so as to fit the shape of the DC 5V
Plug the male