Download  Print this page

Sony BVMF170A Operation Manual Page 104

Professional video monitor.
Hide thumbs

Advertisement

SINGLE
When version 1.2 or later of the
software for the controller is upgraded
When the upgrading starts, the indicator lights as
turning clockwise in the display window of the
controller. The indicator may stop during upgrading,
but the data are being upgraded correctly.
Upgrading takes about 2 minutes for the software
program and about 1 minute for the kernel.
After upgrading, all indicators light for about 1 second.
SINGLE
Notes
• Do not remove the "Memory Stick PRO" from the
Memory Stick insertion slot during upgrading or
disconnect the LAN cable between the monitor and
controller.
• Do not turn off the power of the monitor and
controller during upgrading.
After completion of upgrading, the system is restarted.
The network between the monitor and controller is
reconnected, and you can operate the controller.
When the upgrade sequence does not move forward
correctly, the error message "Err" is displayed in the
display window. If this error message is displayed,
contact your Sony representative.
104
Upgrading the Monitor and Controller
REMOTE
SINGLE
GROUP
ALL
GROUP
ALL
REMOTE
SINGLE
GROUP
ALL
GROUP
ALL
6
Exit the Controller Upgrade menu, select the
Controller Upgrade menu again, and confirm that the
version of the selected item has been upgraded.

Advertisement

Table of Contents

   Also See for Sony BVMF170A

   Related Manuals for Sony BVMF170A

Comments to this Manuals

Symbols: 0
Latest comments: