Pyrolytic Cleaning Functions (Self Cleaning)
Using the Pyrolysis functions
IMPORTANT!! Before starting the Pyrolysis cycle, REMOVE ALL THE ACCESSORIES FROM THE
OVEN, INCLUDING THE SHELF RUNNERS, to avoid them getting damaged. You should also remove the
enamelled side panels because their handles could get discoloured.
Rotate the "Function selection" knob to "Pyrolysis" and select the following self-cleaning functions using
the "+/-" control button:
: runs for a set 3 hours and can be regulated to a minimum of 2 hours.
• "Pyrolysis Express"
: runs for a set 1.5 hours.
Thanks to the guided navigation, the oven allows you to adjust the end time for the Pyrolysis (delayed
start). The oven will wait to start the Pyrolysis according to the end time you set.