Cleaning And Maintenance - Future light DJ-SCAN 250 User Manual

Control channel 5 - Gobo rotation
DMX-value Feature
0-15 No rotation
16-135 Forwards gobo rotation with decreasing speed
136-255 Backwards gobo rotation with increasing speed
Control channel 6 - Shutter, strobe
DMX-value Feature
0-5 Shutter closed
6-128 Dimmer control
129-131 Reset (after 3-5 seconds)
132-139 No function (Shutter open)
140-199 Strobe effect with increasing speed
200-249 Random strobe effect with increasing speed
250-255 No function (Shutter open)

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
The objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing the
light-output very quickly. The cooling-fans should be cleaned monthly.
The gobos may be cleaned with a soft brush. The interior of the fixture should be cleaned at least annually
using a vacuum-cleaner or an air-jet.
The dichroic colour-filters, the gobo-wheel and the internal lenses should be cleaned monthly.
To ensure a proper function of the gobo-wheel, we recommend lubrication in six month intervals. The
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
CAUTION!
14/15 51839250X62NXS_V_1_1_E.DOC