About This Manual; Unpacking The System; Models - Honeywell 2020-5 User Manual

1
Getting Started

About This Manual

This manual contains information to help you set up, operate, and program the
cordless system. Product specifications, connector pinouts, a troubleshooting
guide, and customer support information are also provided.
Honeywell bar code image scanners are factory programmed for the most com-
mon terminal and communications settings. If you need to change these set-
tings, programming is accomplished by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
This section contains the following information:

• Unpacking the System

• Cordless System Main Components
• Battery and Charging Information
• Linking the Image Scanner to the Base
• Beeper and LED Sequences and Their Meaning
• Basic Operation of the Cordless System
• Communication Between the Cordless System and the Host
• Connection of the Base to an Interface
Unpacking the System
After you open the shipping carton containing the product, take the following
steps:
• Check to make sure everything you ordered is present.
• Save the shipping container for later storage or shipping.
• Check for damage during shipment. Report damage immediately to the
carrier who delivered the carton.

Models

Models
2020-5BE
2020-CBE
3820SR0C0BE
3820iSE
Description
Cordless Base that supports the following interfaces:
Keyboard wedge, TTL level 232, TTL level 232 serial
wedge, IBM 4683, wand emulation, USB keyboard, USB
HID, USB retail (IBM SurePOS)
Charge-Only Base
Cordless Linear Image Scanner
Industrial Cordless Linear Image Scanner
1 - 1