Cisco 765 Series Router Commands; Verify The Configuration - Cisco 700 Series Configuration Manual

DHCP Server with IPCP Negotiation Example

Cisco 765 Series Router Commands

Following are the commands for configuring the remote Cisco 765 series router as a DHCP
server with IPCP negotiation with a Cisco 4500 router:
set switch NI-1
set 1 dir 5551211
set 2 dir 5551212
set 1 spid 88855512110101
set 2 spid 88855512120101
set system 765
set dhcp server
set dhcp address 172.168.1.2 128
set dhcp netmask 255.255.255.0
set dhcp gateway primary 172.168.1.1
cd lan
set ip address 172.168.1.1
set ip netmask 255.255.255.0
set ip routing on
set user 4500
set ip routing on
set active
set 1 number phone_number
set 2 number phone_number
set ip routing on
set ip rip version 2
set ip rip receive v2
set ppp address negotiation local on
set ip rip update periodic
reboot
For detailed information regarding the commands listed here, refer to the Cisco 700 Series
Router Command Reference.

Verify the Configuration

When a call is made, you can use the show ip configuration all and show ip route all
commands to see the IPCP negotiation address.
You can use the show dhcp configuration command to see the IP address returned by
DHCP.
5-8 Cisco700 Series Router Configuration Guide