Table of Contents
Advertisement
HOW TO USE
SPECIAL FUNCTIONS
CONTROL LOCK
Use this option to disable the controls.
The washer can only be locked during
a cycle. This feature can prevent
children from changing cycles or
operating the machine. Once set, the controls remain locked
and must be turned OFF before the controls can be used
again. Once the washer has shut off, the power button will
allow the machine to be turned ON, but the controls will still
be locked. When the controls are locked, the Control Lock
LED will illuminate and "CL" will display alternately with the
estimated time remaining.
To activate the control lock, press and hold the
EXTRA RINSE button for five seconds.
CLEAN WASHER
Detergent residue can build up in the
wash drum over time and can lead to a
mildewy or musty smell. The Clean
Washer cycle is specially designed to
remove this buildup using bleach or another cleaner designed
specifically for cleaning front load washers. Run the Clean
Washer cycle once a month, or more often under heavy use
conditions or if odor is present. See complete instructions in the
CARE AND CLEANING section.
Turn ON the washer and press the CLEAN WASHER
1
button. Selecting any other cycle after Clean Washer has
been selected will cancel the Clean Washer cycle.
2
Fill the bleach dispenser to the MAX line with liquid
chlorine bleach. Do not overfill the bleach dispenser.
Overfilling will cause the bleach to dispense immediately.
NOTE: For other drum cleaning products, follow
the cleaner manufacturer's instructions and
recommendations. For powdered cleaning products,
add the cleaner to the main wash compartment of
the dispenser drawer. Place tablet cleaners directly
into the drum.
3
Press the START/PAUSE button to start the cycle.
4
After the cycle has ended, secure the door slightly ajar
with the door magnet. This will promote air circulation
and allow the interior of the machine to dry. To use this
feature, close the door just until it contacts the door
magnet.
NOTE: Do NOT use this cycle with clothes, and do
NOT add detergent or fabric softener.
MY CYCLE
other options for a cycle, and then recall them at the touch
of a button.
NOTE: You can only save a setting for one cycle at a
time. Press and hold the MY CYCLE button to overwrite
any previously saved cycle.
To save a MY CYCLE:
1
Press the POWER button to turn on the washer.
2
Turn the cycle selector knob to select the desired cycle.
3
Press the CYCLE MODIFIER button to change the desired setting.
4
Press the CYCLE OPTION button to add the desired options.
5
Press and hold the MY CYCLE button.
To recall a MY CYCLE:
1
Press the POWER button to turn on the washer.
2
Press the MY CYCLE button. The stored settings will be
displayed.
3
Press the START/PAUSE button to start the cycle.
NOTE: MY CYCLE can be adjusted the same as any
other cycle. However, once any other button is pressed,
the LED will turn off indicating that the settings are no
longer those of your saved cycle.
AUTO SOAK
to the start of the selected cycle. At the end of the
presoak time, the selected cycle will use the same water.
STAY FRESH
and hold the CLEAN WASHER button for approximately
five seconds.
22
MY CYCLE allows you to store a
customized wash cycle for future use.
It allows you to save favorite
temperature, spin speed, soil level, and
Use the Auto Soak option to presoak
garments to help remove difficult
spots or stains on fabric. This option
provides a 30 minute presoak prior
The Stay Fresh option helps keep
wrinkles from setting in clothes.
To select the Stay Fresh option, press
Hide quick links:
Advertisement
Table of Contents
