Func Key; Waypoints - Furuno FCV-585 Operator's Manual

From
(0∼2500ft)
[ENTER] : Set
[MENU] : Cancel
Depth setting window
(20.0∼110.0°F)
Temperature
Temperature, Speed setting box
7. Use or to set starting depth, tempera-
ture or speed as appropriate and press the
ENTER key. For Bottom and Fish (Normal),
the starting depth is the range from the trans-
ducer, and for Fish (B/L), from the bottom.
Alarm range
Alarm range marker
Bottom alarm, Fish alarm (normal): Right
Fish alarm (B/L): Center
* Alarm icon
(Appropriate icon
appears to show
which alarm has
been violated.)
How the alarm works
8. Use to choose Span (or Radius for Arrival)
and press the ENTER key.
9. Use or to set the range of depth, tem-
perature, speed or distance as appropriate.
To shorten the alarm range marker use
and to lengthen use
10.For the bottom alarm, temperature alarm,
speed alarm or arrival alarm, press the
ENTER key to finish, and then go to step 13.
For a fish alarm, press the ENTER key and
go to step 11.
(0.0∼99.0kt)
Speed
Alarm icon*
Starting
point
: Bottom alarm
: Fish alarm (normal)
: Fish alarm (B/L)
: Temperature alarm (°F)
: Speed alarm
: Arrival alarm
.
11.Use to choose Fish Level and press the
ENTER key.
Fish Level setting box
12.Use or
level which will trigger a fish alarm and press
the ENTER key.
Weak: Light-blue or stronger echoes
Medium: Yellow or stronger echoes
Strong: Red and reddish brown echoes
13.Press the MENU/ESC key twice to close the
window.
Note1: To disable an alarm, choose Off at step
4 in the above procedure.
Note2: The audio and visual alarms are
released against the last-violated alarm when
multiple alarms are active.

1.17 FUNC Key

The FUNC key provides for instant display of a
user-defined options window chosen with
FUNC Key on the Key menu. Nine items are
available: Pic. Advance (default), Shift, Interfer-
ence, Clutter, Color Erase, White Line, White
Marker, WPT List and Bottom Zone. For details
about registration, see section 2.3. Use the
FUNC key as follows.
1. Press the FUNC key to open the setting
window registered; for example, Pic.
Advance setting window.
2. Use FUNC key,
and press the ENTER key.

1.18 Waypoints

Waypoints may be used to:
• Record the position of an important echo as
waypoint. 20 points may be registered.
• Output a waypoint position to a plotter to
mark position on its screen.
,
• Find range, bearing and time-to-go to a
location (waypoint).
Note: Requires latitude and longitude position
from a navigator.
13
1. OPERATION
Weak
Medium
Strong
to choose the echo strength
or to adjust the setting