Kenwood KDC-355U Instruction Manual page 9

If a locked channel or a mature channel ([MATURE CH] is set to [ON])
is selected, a pass code input screen appears. Enter the pass code to
receive the channel.
•
To store a channel of the current band: Press and hold one of
the number buttons (1 to 6).
•
To select a stored channel of the current band: Press one of the
number buttons (1 to 6)
Direct Access Tuning (using RC-406) (except for
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a channel number, then press
4 / ¢ (+) to start searching.
• To cancel, press or DIRECT.
Replay
Press G.
Replay starts from the live position (and "
During Replay...
• To pause or resume playback, press 6 38.
• To skip the current song backward/forward, press 4 / ¢.
• To rewind/fast-forward, press and hold 4 / ¢.
• To exit from Replay and go to live, press G.
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SETTINGS], then press the knob.
3
Turn the volume knob to make a selection (see table on the right),
then press the knob.
4
Press and hold to exit.
SEEK MODE
CHANNEL LOCK/ CH LOCK
KMR - 355U
)
CODE SET
KDC - X397
" lights up for ).
CHANNEL EDIT/CH EDIT *
CHANNEL CLEAR/CH CLEAR *
MATURE CH
SIGNAL LEVEL/ SIGNAL LVL
BUFFER USAGE/ BUF USAGE 0% — 100% (0): Shows the memory usage for Replay buffer.
* Displayed only when [MATURE CH] is set to [OFF].
Selects the tuning method for the 4 / ¢ buttons.
CHANNEL: Manually search for a channel. ; PRESET: Search for a preset channel of
the selected band.
To unlock settings:
1 Turn the volume knob to select a number.
2 Press 4 / ¢ to move to the entry position.
3 Repeat steps 1 and 2 to enter the current pass code.
(Initial pass code is 0000.)
4 Press the volume knob to confirm.
1 Turn the volume knob to select a number.
2 Press 4 / ¢ to move to the entry position.
3 Repeat steps 1 and 2 to enter a new 4-digit pass code.
4 Press the volume knob to confirm.
5 Repeat steps 1 to 4 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings from next time.
1 Turn the volume knob to select a category, then press the knob.
2 Turn the volume knob to select a channel you want to lock, then press the
knob. "L" appears in front of the channel number.
3 Press G to exit.
YES: Clears all the locked channels. ; NO: Cancels.
ON: Turns on the Sirius XM-defined lock setting (mature channel). ; OFF: Turns off.
• If [ON] is selected, your setting (CHANNEL EDIT/ CH EDIT) is temporary ignored.
NO SIGNAL/ WEAK/ GOOD/ STRONG: Shows the strength of the current received signal.
SiriusXM™
Default: XX
ENGLISH | 9