Sharp MS722 - MiniDisc Recorder - Metallic Service Manual page 47

To have your order filled promptly and correctly, please furnish the
following information.
1. MODEL NUMBER
3. PART NO.
MARK: SPARE PARTS-DELIVERY SECTION
Explanation of capacitors/resistors parts codes
Capacitors
VCC ....................... Ceramic type
VCK ........................ Ceramic type
VCT ........................ Semiconductor type
VC • • MF ............... Cylindrical type (without lead wire)
VC • • MN ............... Cylindrical type (without lead wire)
VC • • TV ................ Square type (without lead wire)
VC • • TQ ............... Square type (without lead wire)
VC • • CY ............... Square type (without lead wire)
VC • • CZ ............... Square type (without lead wire)
VC • • • • • • • • • J .. The 13th character represents capacity difference.
("J" 5%, "K" 10%, "M" 20%, "N" 30%,
"C" 0.25 pF, "D" 0.5 pF, "Z" +80-20%.)
If there are no indications for the electrolytic capacitors, error is 20%.
NOTE:
Parts marked with " " are important for maintaining the safety of the set.
Be sure to replace parts with specified ones for maintaining the safety and performance of the set.
PARTS GUIDE
MODEL
"HOW TO ORDER REPLACEMENT PARTS"
2. REF. No.
4. DESCRIPTION
– 47 –
MD-MS722/C/W/MS721W
MD-MS722
MD-MS722C
MD-MS722W
MD-MS721W(BL)
MD-MS721W(S)
For U.S.A. only
Contact your nearest SHARP Parts Distributor to order.
For location of SHARP Parts Distributor,
Please call Toll-Free;
1-800-BE-SHARP
Resistors
VRD ....................... Carbon-film type
VRS ........................ Carbon-film type
VRN ....................... Metal-film type
VR • • MF ............... Cylindrical type (without lead wire)
VR • • MN ............... Cylindrical type (without lead wire)
VR • • TV ................ Square type (without lead wire)
VR • • TQ ............... Square type (without lead wire)
VR • • CY ............... Square type (without lead wire)
VR • • CZ ............... Square type (without lead wire)
VR • • • • • • • • • J .. The 13th character represents error.
("J" 5%, "F" 1%, "D" 0.5%.)
If there are no indications for other parts, the resistors are 5%
carbon-film type.