Sony HCD-DH7BT - Dvd Receiver For Cmtdh7bt Micro System Service Manual page 12

HCD-DH3/DH5BT/DH7BT
QQ
3 7 63 5 5
– HCD-DH3 –
Display
1 Indicates the selected function.
2 Indicates the selected play mode.
3 Lights up when timer is set.
4
Lights up when a station is tuned in.
5
Lights up when DSGX is turned on.
6 Indicates the Playback status.
7 Lights up when DTS is selected.
8
Lights up when Dolby Digital is
selected.
9 Lights up when "P AUTO" or
"P VIDEO" is selected.
TE
L 3 422 65 3
– HCD-DH7BT –
Display
1 Indicates the selected function.
2 Indicates the selected play mode.
3 Lights up when timer is set.
4 Lights up when a station is tuned in.
5 Lights up when DSGX is turned on.
www
6 Indicates the Playback status.
7 Lights up when DTS is selected.
8 Lights up when Dolby Digital is
selected.
9 Lights up when CATEGORY MODE
.
is selected.
12
http://www.xiaoyu163.com
q; Lights up when the output video
signal is NTSC.
Lights up when playing VIDEO CD
qa
with PBC.
qs Indicates the type of audio format.
qd Indicates the track/album
information.
Lights up when chapter or title
qf
number is displayed.
qg
Indicates the type of disc being played
back.
qh Displays the text information.
q; Lights up when "P AUTO" or
"P VIDEO" is selected.
qa Lights up when playing VIDEO CD
with PBC.
qs Lights up when playing an MP3 audio
track.
qd Indicates the track/album
information.
x o u 63
qf Lights up when chapter or title
y
number is displayed.
qg Indicates the type of disc being played
i
back.
qh Displays the text information.
http://www.xiaoyu163.com
8
– HCD-DH5BT –
Display
1 Indicates the selected function.
2 Indicates the selected play mode.
3 Lights up when timer is set.
4 Lights up when a station is tuned in.
5 Lights up when DSGX is turned on.
6 Indicates the Playback status.
7 Lights up when DTS is selected.
8 Lights up when Dolby Digital is
selected.
9 Lights up when an optional USB
device is connected.
q; Lights up when "P AUTO" or
"P VIDEO" is selected.
Q Q
7 3 3 6 5
Setting the clock
Use buttons on the remote to set the
clock.
1
Press ?/1 to turn on the
system.
2
Press TIMER MENU.
The hour indication flashes in the
display.
If "PLAY SET?" flashes in the
display, press V or v repeatedly
to select "CLOCK SET?," then press
ENTER.
3
Press V or v repeatedly to set
the hour.
4
Press ENTER.
The minute indication flashes in the
display.
5
Press V or v repeatedly to set
the minutes.
6
Press ENTER.
The clock starts functioning.
Note
co
The clock settings are canceled when you
disconnect the power cord or if a power failure
occurs.
.
To display the clock when the system
is off
Press DISPLAY.
The clock is displayed for about
8 seconds.
4 2 2 8
qa Lights up when the output video
signal is NTSC.
(Except Canadian model)
qs Lights up when playing VIDEO CD
with PBC.
qd Indicates the type of audio format.
qf Indicates the track/album
information.
qg Lights up when chapter or title
number is displayed.
qh Indicates the type of disc being played
back.
qj Displays the text information.
5 8 4 2 2 8
m