Setting Up Your Divx Connected Device - D-Link DSM 330 - DivX Connected HD Media Player User Manual

Setting Up Your DivX Connected Device

Setting Up Your DivX Connected Device
You can set up a DivX Connected™ device to work with an Ethernet or a wireless connection. This guide
assumes that you already have a PC running the DivX Connected Server and a router on your network.
Important: If you are installing a network for the first time, follow the network
installation instructions for your router first.
To install the DivX Connected device on your network:
1. Start the DivX Connected Server software on your PC.
2. Install batteries in the remote control.
3. Attach the wireless antenna to the back of the DivX Connected device, as
shown (even if you are not using wireless).
4. If you want to connect to the device using Ethernet, connect the device
to your network router using a Cat-5 Ethernet cable via the LAN ports
(omit this step for wireless connections).
5. Make sure that any PCs running the DivX Connected Server are attached
to your router LAN ports or connected wirelessly.
6. If your device came with cables, use them to connect the device to your TV. You also have the
option to obtain any of the cables below for alternate configurations. The cable used depends on
your TV and the desired connection. If you use the SCART component cables, you also need
audio connection cables.
SCART Component
Connecting the Device to Your Television
7. Attach the power cord and power adapter to the rear of the device.
A/V Composite
describes connection details.
Copyright © 2007, DivX, Inc., Confidential
DivX Connected User Guide
Wireless Attachment
HDMI
D
5