Cleaning With Attachments - Bissell ProHeat 2X 8920 Series User Manual

O
perations

Cleaning with attachments

Your PROheat 2X machine comes
equipped with a hose and at least
one attachment for cleaning stairs,
upholstery, and more.
1. Important! if using to clean uphol-
stery, check upholstery tags.
a. check manufacturer's tag before clean-
ing. "W" or "Ws" on the tag means
you can use your pRoheat 2X. if the
tag is coded with an "X" or an "s"
(with a diagonal stripe through it), or
says "dry clean only", do not proceed
with any deep cleaning machine. do
not use on velvet or silk. if manufactur-
er's tag is missing or not coded, check
with your furniture dealer.
b. check for colorfastness in an incon-
spicuous place.
c. if possible, check upholstery stuffing.
colored stuffing may bleed through
fabric when wet.
d. plan activities to allow upholstery
time to dry.
e. pick up any loose dirt, debris and pet
hair before deep cleaning.
2. follow the instructions on pages 9-10 for
filling the 2-in-1 water tank and the formula
tank.
3. set Readytools dial to the "tools"
setting. this will allow spray and suction
from the hose.
4. set custom clean dial for heavy traffic,
normal clean, light clean, or water rinse
as desired.
5. attach the cleaning tool to the end of the hose.
6. plug in and turn on the power switch and
heater (if desired).
7. clean by pressing the trigger to spray
solution onto the area to be cleaned.
slowly move the tool back and forth over
the soiled surface. Release the trigger to
suction soiled water. continue to clean in
the area, working in small sections, until no
more dirt can be removed. Rinse (optional)
and suction as needed.
Caution: Do no overwet.
12
w w w . b i s s e l l . c o m
Manufacturer's tag
5.
WARNING:
risk of injury, be extra careful when
cleaning stairs. make sure machine is
secure and level.
to reduce the
8 0 0 . 2 3 7 . 7 6 9 1