Care And Cleaning; General Cleaning Tips; Exterior; Inside Walls - Kenmore 795.7235 Use & Care Manual

Grab-n-go bottom freezer refrigerator
Hide thumbs Also See for 795.7235:
Table of Contents

Advertisement

Explosion Hazard
Use non-flammable
cleaner. Failure to do so can result
in fire, explosion,
or death.
Both the refrigerator
and freezer sections defrost
automatically;
however, clean both sections about once a
month to prevent odors. Wipe up spills immediately.
GENERAL CLEANING
TIPS
Unplug the refrigerator
or disconnect
power.
Remove all removable
parts, such as shelves, crispers,
etc. Refer to sections in Using Your Refrigerator
for
removal instructions.
Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use abrasive or harsh cleaners.
Hand wash, rinse and dry all surfaces thoroughly.
Plug in the refrigerator
or reconnect
power.
EXTERIOR
Waxing
external
painted
metal surfaces helps provide
rust protection.
Do not wax plastic parts. Wax painted
metal surfaces at least twice a year using appliance
wax
(or auto paste wax). Apply
wax with a clean, soft cloth.
For products with a stainless steel exterior, use a clean
sponge or soft cloth and a mild detergent
in warm water.
Do not use abrasive or harsh cleaners.
Dry thoroughly
with a soft cloth.
INSIDE WALLS (allow the freezer to warm up so
the cloth will nat stick)
To help remove odors, you can wash the inside of the
refrigerator
with a mixture of baking soda and warm
water. Mix 2 tablespoons
of baking
soda to 1 quart of
water (26 g soda to 1 liter water.) Be sure the baking
soda
is completely
dissolved
so it does not scratch the surfaces
of the refrigerator.
,_,CAUTION:
While cleaning
the inside of the refrigerator,
do not spray water.
DOOR LINERS AND GASKETS
Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use cleaning
waxes, concentrated
detergents,
bleaches, or cleaners containing
petroleum
on
plastic refrigerator
parts.
PLASTIC PARTS (Covers and Panels)
Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use window
sprays, abrasive
cleansers, or flammable
fluids. These can scratch or
damage
the material.
CONDENSER COILS
Use a vacuum cleaner with
an attachment
to clean the
condenser cover and vents.
Do not remove the panel
covering the condenser
coil area.
34

Advertisement

Table of Contents
loading

Table of Contents