Download Print this page

Garmin TR-1 Installation And User Manual

Ad 10 gateway nmea 0183 to ad10 converter for furuno radar/chartplotters
Hide thumbs Also See for TR-1:

Advertisement

Quick Links

"The Integrator"
NMEA 0183 to AD10 Converter
for Furuno Radar/Chartplotters
Installation and User Manual
906-2800-00
Ver A01

Advertisement

loading

Summary of Contents for Garmin TR-1

  • Page 1 “The Integrator” NMEA 0183 to AD10 Converter for Furuno Radar/Chartplotters Installation and User Manual 906-2800-00 Ver A01...
  • Page 2 “The Integrator” AD10 Gateway provides the ability to interface with (Furuno) radars/chartplotters that utilize the AD10 data format. The Integrator will allow the owner of a TR-1 Gladiator Autopilot to directly interface with radars/chartplotters and utilize the MARPA functions without the expense of purchasing an additional heading sensor with AD10 data output.
  • Page 3 Radar/Chartplotter MARPA Confi guration The radar or plotter should be confi gured for magnetic oriented AD10 data when using the TR-1 Gladiator as the heading data source. As setup procedures are unit specifi c, please refer to the operator’s manual of your Radar/Charplotter, for proper confi guration procedure.
  • Page 4 The TR-1 Gladiator’s NMEA output should be set to send at its highest rate (10 Hz). The Gladiator’s default setting is 10Hz. If you have changed this setting or do not know what setting it is on, follow these instruc- tions.

This manual is also suitable for:

Tr-1 the integrator