Oven Lockout; Mode - Kenmore 790.9700 Series Use & Care Manual

Hide thumbs Also See for 790.9700 Series:
Table of Contents

Advertisement

Setting Oven Controls
Changing
oven temperature
display
The oven control is preset to display °F (Fahrenheit)
when
shipped
from the factory.
The control
can be changed
to
display either Fahrenheit
or Celsius.
Example;
to change the temperature
to display °C
(Celsius) or °F (Fahrenheit):
1. Press and hold Broil key pad for 6 seconds.
2. Press Flex Clean key pad to toggle
between Fahrenheit
or Celsius temperature
display modes (Figs. 1 & 2).
3. Press STA,Tto accept choice.
Important
note:
The oven temperature
display
cannot
be modified
if Bake
or Flex Clean is active.
Fig. 1
Fig. 2
Setting silent or audible control mode
Silent mode allows the oven control to operate without
audible tones. The control may be programmed
for silent
operation
and later returned
to operating
with all the
normal
audible
tones.
Example;
to set for silent or audible mode:
1. Press and hold Delay Start key pad for 6 seconds.
2. Press Flex Clean key pad to toggle between
beep ON
(Fig. 3) or beep OFF (Fig. 4).
3. Press START t o accept
choice.
Fig. 3
Fig. 4
Setting Oven Lockout
The control
may be programmed
to lock the
oven door and lock the oven control
key pads.
I_1
OVEN
LOCKOUT
To
1.
.
activate the oven lockout feature:
Be sure oven door is completely
closed.
Press and hold
STOP for 3 seconds.
DOOR LOCKED
(See
Fig. 5) will appear
in the display.
The motor
driven door
latch mechanism
will begin locking
the oven door
automatically.
Do not open the oven door. Allow
about
15 seconds for the oven door to completely
lock. Once
the oven door is locked,
the Loc will appear
in the
display
(See Fig. 6).
Fig. 5
Fig. 6
To cancel the oven lockout feature:
1. Press and hold
STOP for 3 seconds. The motor driven
door latch mechanism
will begin
unlocking
the oven
door automatically.
Do not open the oven door. Allow
about 15 seconds for the oven door to completely
unlock.
2. When the Loc and DOOR LOCKED messages no longer
display,
the oven door may be opened
and the oven
control
key pads will be available
for use.
Important
notes:
• To avoid
possible damage
to the oven door latching
mechanism,
do not attempt
to open or close the oven
door whenever
the DOOR LOCKED
message is flashing.
If a control
key pad is pressed when OVEN
LOCI(OUT
is
active, the control
may triple
beep indicating
the key
pad action
is not available
when the OVEN
LOCI(OUT
feature
is active.
Page 18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents