Preparing And Loading Dishes; Dish Preparation; Loading The Top Rack; Loading The Bottom Rack - Kenmore 587.14000 Use & Care Manual

Preparing and Loading Dishes
Dish Preparation
Scrape away large pieces of food, bones, pits,
toothpicks, etc. The continuous filtered wash
system will remove remaining food particles.
Burned-on foods should be loosened before
loading. Empty liquids from glasses and cups.
Foods such as mustard, mayonnaise, vinegar,
lemon juice and tomato based products may
cause discoloration of stainless steel and plastics
if allowed to sit for a long period of time. Unless
the dishwasher is to be operated at once, it is best
to rinse off these food soils.
Load racks so that large items do not prevent
the detergent dispenser from opening.
Check manufacturer's recommendations before
washing items in question.
If the dishwasher drains into a food disposer,
be sure disposer is completely empty before
starting dishwasher.
Loading the Top Rack
The top rack is designed for cups, glasses, small
plates, saucers and bowls.
Load glasses in top rack. Damage may occur if
placed in bottom rack.
Load plastic items in top rack only. Melting may
occur if placed in bottom rack.
Load items with open ends facing down for better
cleaning and draining.
Damage may occur if delicate items touch each
other during dishwasher operation.
Long-handled knives and utensils can be placed in
top rack.
Loading the Bottom Rack
Place plates and platters so that they do not
touch.
Place bowls, casseroles and sauce pans with the
soiled surface facing down or toward the center.
Tilt slightly for better drainage.
Be sure pan handles do not protrude through the
bottom of the rack and block the spray arm
rotation.
Do not block
tower protector.
5