Advertisement
+
Powe_ Turns
uff
READALLINSTRUCTIONS B EFORE USINGTHISHEATER
Operating your Kenmore_byEdenPURE _
1)
Before startingoperation, lift heater from box. We recommendkeeping the packaging for off-
seasonstorage and any transportneeds.
2)
Finda level andunobstructedlocation to place the unpackaged heater.
3)
Donot plug any otherappiicmces in whileheater is running.
4)
Plug the powercord directly intoan unused grounded 120 volt15 amp circuit receptacle. The
power buttonwiUilluminateandthe heater wilt beep, indicating the unitisplugged intothe
receptacle.
If using the remote, insertbatteriesintothe battery compartmentonthe remotecontrol
Press the POWERbutton in thecontrolpot++to turn onlee heater.
Switchthe Mode Key to "High" in order to have the heater stay onhigh heat and not cyde on
and off.
8)
Theheater isequlppedwith a temperature limiting controlcontained insidethe unit.If the heaterstops
working, i t could be becauseit has reached itstemperature trait. Shutthe poweroff, unplugunitand
let the unit c ool down[Approximately 3045 minutes), p lugin unit,turnthepower backon and resume
use.if the unit continues to shut d ownor theunitdoes notresetitself, p lease call 1-800-839-0966.
5)
6)
7)
IMPORTANT FEATURE AND INSTRUCTION:To turn the heater off, press the '+Power" button;
the fan will continue to run until atl of the heat has been expelled and will leon turn off. This
could up to 5 minutes in some cases.DO NOT UNPLUGWHILE RUNNING.
Cabinet Care
- Wipe
clean with asoft d amp cloth.
Heater Storage - When the heater isnot going to be usedfor an extended period of time+ do the
following:
1)
Unplugthe heater.
2)
Wind up electricalcord so asto keep it off of the ground.
3)
Cover the heater to prevent dustfromaccumulating on flffer or internally.
4)
Storethe heater tn a dry, low dust environment. Preferably in tee original box.
SERVICE - To replace a heating element or for otherrepairs or service, please call
1-800-839-0966.
4
Advertisement
