Kenmore 116.22614 Use & Care Manual page 13

ATTACHMENTS
CAUTION
DO NOT attach or remove handle or
telescoping wand while vacuum cleaner is
ON. This could cause sparking and
damage the electrical contacts.
ATTACHMENTS ON HANDLE
NOTE: If the
PowerMate is Lock
attached, turn off Button
and unplug Handle
vacuum cleaner Quick
before removing Release
handle from Button--
telesoping wand.
1. Press handle
quick release
button and pull up
on handle.
2. Slide attachments firmly on handle as
needed. See ATTACHMENT USE TABLE
(page 14).
ATTACHMENTS ON
TELESCOPING WAND
1. To remove telescoping wand from
PowerMate, lock telescoping wand in
straight-up position.
/
/
2. Presswand quick release pedal with foot
and pull the telescoping wand straight up
and out of PowerMate.
_-----_ Telescoping
U Wand
i
_/-Wand Quick
PowerM_Release Pedal
3. Put attachments on telescoping wand as
needed. See ATTACHMENT USE TABLE
(page 14).
- 13 -