Grounding; Conversion To L.p. Gas; Serial Plate Location - Kenmore 790.7403 Use & Care Manual

Table of Contents

Advertisement

IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this appliance.
_l__Other
surfaces
of the appliance
may become
hot enough to cause burns
including
oven vent openings and surfaces
near these openings,
oven doors, and
windows
of oven doors.
Grounding
Instructions
Avoid
fire hazard
or electrical
shack. Do not use an adapter
plug, and
extension
card, or remove
grounding
prong
from the power card. Failure to follow
this
warning
may cause serious injury, fire, or
death.
This appliance
is equipped
with a three-
prong grounding
plug. For your protection
against
shack hazard,
it should
be plugged
directly
into a properly
grounded
receptacle.
Do not cut or remove the grounding
prong
from this plug.
For personal
safety, this appliance
must be
properly
grounded.
For maximum
safety, the
power
card must be plugged
into an elec-
trical
outlet that is correctly polarized
and
properly
grounded.
If a two-prong
wall
receptacle
is the only
available
outlet, it is the personal
responsi-
bility
of the consumer to have it replaced
with a properly
grounded
three-prong
wall
receptacle
installed
by a qualified
electri-
cian.
Conversion
to L.P. Gas
Personal injury or death from
electrical
shock may occur if the conversion
to L.P. gas is not made by a qualified
installer or electrician.
_Any
additions,
changes or conver-
sions required
in order for this appliance
to
satisfactorily
meet the application
needs
must be made
by a qualified
technician.
If L.P. conversion is needed,
contact your
local L.P. Gas provider
for assistance.
The L.P.
conversion kit is provided
with this appliance
and is located
on the lower REAR (back side)
panel
of the range.
Before installing
the kit
be sure to read the L.P. Installation
Instruc-
tions and follow
them carefully when making
the installation.
Product Record: You may find the model and serial
number printed on an identification
label. The label
is located
on the lower right of the oven frame.
Open the drawer
to see the serial label.
Serial Plate Location
To locate the serial plate open storage drawer
(some
models) or warmer
drawer
(some models). The serial
plate is attached
to the lower right oven frame.
Record the date of purchase, model and serial
number of your product in the corresponding
space
below.
Model
Number:
Grounding
type
wall receptacle
Do not cut, remove, or
bypass the grounding
plug under any
circumstances.
Serial Number:
Date of Purchase:
Save your sales receipt for future reference.
Power
supply
cord
with
3-prong
grounding
plug
See the installation
instructions
packaged
with this appliance
for complete
installation
and grounding
instructions.
This appliance
allows for conversion to
Liquefied Petroleum (L.P.) Gas.
Save these instructions for future
reference.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

74137404790.7413790.7404

Table of Contents