For information about planning network and telephone lines for your
Express5800/320Ma 3.2 GHz, 3.6 GHz, or Dual-Core system, see:
•
"Network Cable Requirements" on page 6-1
•
"Telephone Line Requirements" on page 6-2
•
"Site Planning for Systems in an ftGateway Group" on page 6-3
Network Cable Requirements
Ethernet PCI adapters are typically supplied in pairs and teamed in software for fault
tolerance. Each member of the pair requires a cable.
!
Table 6-1
describes the Ethernet cables you must supply. Be sure to provide a cable of
sufficient length for the distance between the system and a wall jack or hub.
Network and Telephone Line Planning
W A R N I N G
Make sure Ethernet cables can be routed out of the
way of foot traffic.
N O T E
See the Express5800/320Ma: PCI Adapter Guide for
more information about the adapters NEC Solutions
(America), Inc. supplies for your Express5800/320Ma
system.
Network and Telephone Line Planning
Chapter 6
6-
6-1