Auto Program; Clear Scrambled Channel - Samsung DE55C User Manual

6
Channel
6.2

Auto Program

The Auto Program function memorizes all channels that are available over the air or through your cable
system and adds them to the Channel List.
To start Auto Program, follow these steps:
1
Push
Source screen appears.
2
On the Antenna Source screen, select the source of your product signal.


3
On the cable type screen, use the
systems you have: STD, HRC, or IRC. Most systems are STD (Standard). When done, select Next,
and then press


6.3

Clear Scrambled Channel

m
MENU [
(digital channels only)
This function filters out scrambled channels after
to 20~30 minutes.
How to Stop the Clear Scrambled Channels function
1
Press the [
2
Press the [ ] button to select Yes.
3
Press the [
This function is only available in
m
MENU [ ] Channel
Air: If your product is connected to an antenna choose Air, and then press
product will automatically start memorizing channels.
Cable: If your product is connected to a cable outlet, choose Cable, and then press
[ ] . Go to Step 3.
/ / /
[ ]. The product will start memorizing channels.
ENTER
Channel memorization can take up to 45 minutes, depending on your cable system.
Memorized channels are added to the Added Channels list. These are the channels you will
see when you use the channel buttons on your remote.
] Channel Clear Scrambled Channel
] button to select Stop.
] button.
Cable
Auto Program ENTER
buttons to select the type of digital and analog cable
ENTER
Auto Program is completed. This process may take up
mode.
[ ] on your remote. The Antenna
[ ] . The
ENTER
ENTER
[ ]
6 Channel
124