Kenmore 15831 Use & Care Manual page 15

f
o o
SENSING WASHING
Ultra WashSensor . OuietguardSystem
WATER HEATING CLEAN CONTROL LOCI(
I " " "1"1"
QUICK _'}
(POTS NORMAL WATER CHINA RINS V
PANS WASH M SER WASH
SENSING CYCLES
"" 1
WATER I.O.E
LHEo;TIo::Y / _ @ _ @
,J
Option
Water Heat
+ Automatic with Pots & Pans
® Option for Norman Wash and
Water Miser cycHes
+ Not avaiHabHe for China Wash
or Quick Rinse cycHes
No Neat Dry
+ Option for Pots & Pans,
Norman Wash, Water Miser
and China Wash cycHes
Delay Start
® Option for any cycHe
When should I use it?
To ensure water temperature in
Main Wash reaches 135°F
(57°o).
Use when you do not need a
rapid dry cycHe+AHHow Honger
drying times (overnight). Use
rinse agent to improve drying.
Use when you want to start a
cyclic Hater.
Set deHay to run dishwasher
during times when off-peak
utiHity rates are in effect or
when you are away from home.
LocaH utiHities recommend this
to avoid heavy usage of energy
at certain times of day+
What does it do?
0
0
When you seHect Water Heat, main wash
deHaysuntiHwater heats to 135°F (57°C)+
As water heats, washing action continues.
Water Heating status indicator gHows and
eHectronic time dispHay pauses untiHwater
reaches proper temperature.
+ Turns off heating eHement in 30-minute dry
period.
® DeHaybeginning of your seHected cycHe and
options in one hour increments up to nine
hours.
® To set:
1. Press cyclic and option pads.
2. Press DeHayStart pad+ Increase deHay one
hour for each press of DeHayStart pad+
TotaHdeHay time appears on eHectronic
3. Press Start pad+ Once Start pad is
pressed, deHay begins+ DeHaytime dis-
pHayed on controH paneHflashes once.
CycHeand options begin as soon as deHay
time expires+ If Start pad is not pressed
within 30 seconds of finaH seHection, you
need to re-seHect your cycHe, options and
deHay settings+
+ You can change cyclic and option seHections
any time during deHay period. You can aHso
eHiminate the deHay by pressing Start pad any
time. The dishwasher wiHH start immediateHy+
14