Sears Kenmore Air Conditioner Owner's Manual page 9

Air Conditioner Features
(con'Linued)
STEP 10 -- SLEEP FEATURE: YOU WILL SEE:
DO THIS:
PRESS SLEEP
PAD
1
Note: /n this "MODE" the selected temperature will increase by 2 degrees F 30 minutes after the mode is selected, The
temperature will then increase by another 2 degrees F after an additional 30 minutes, This new temperature will be maintained
for 7 hours before it returns to the originally selected temperature, This ends the "Sleep" MODE and the unit will continue to
operate as originally programmed. The "Sleep" MODE program can be cancelled at any time during operation by pressing
"Sleep" MODE, "On/Off", "Fan Only" or the "V / A" buttons, on either the Control or the Remote. "Time Delay Stop"
fimit reached will also end "sleep" MODE.
STEP 11 -- CHECK FILTER
FEATURE:
YOU WILL SEE:
DO THIS:
PRESS TO RESET
0
Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation and cooling, The
LED (light) will illuminate after 250 hours of operation, whether in cooling or fan only, To reset after cleaning the filter, press
the "Check Filter" button and the fight will go off. This will restart the 250 hours, this timing cannot be reset unless the LED
(fight) is on. This feature cannot be reset with the remote.
STEP 12 --TO TURN UNIT OFF: YOU WILL SEE:
DO THIS: I
PRESSON/OFF
PAD
9