Sears Kenmore Air Conditioner Owner's Manual page 8

Air Conditioner Features
(con'tinued)
STEP 7 -- TIMER-DELAY
STOP FEATURE
YOU WILL SEE:
Note: The unit must be running to make this setting.
DO THIS:
PRESS
(if unit is not
running)
PRESS
Proceed as in step 9 to change the desired number of hours, before the control will time out and turn off.
STEP 8 -- TIMER-DELAY
START FEATURE:
DO THIS:
PRESSOFF
f unit is running)
}RESSTIMER/OFF
YOU WILL SEE:
Note: To do this, the unit must be in the off position.
When first set, the display will show .5. (one half hour),to increase the time up to 24 hours, go to step 9.
STEP 9 -- TO INCREASE
DELAYED START TIME:
YOU WILL SEE TIME CHOSEN:
DO THIS:
PRESS
I
Note: Tap or hold the UP arrow(,',) to increase delayed start time by .5 hours (up to 10 hours), then in 1 hour increments up to
24 hours. The control will count down the time remaining until start (8, 7.5, 7, etc.).
The unit will then come on in Cool and H/fan mode. The temperature maintained will be the same as you previsouly set./f you
want to change it, Press 'Cool" or "Power Saver Mode" pad, whichever you desire, then Up or Down arrows until the desired
temperature is indicated on the display. Pressing timer "On/Off" or after 5 seconds, the control wifl automatically change the
display back to the hours remaining until the unit will start.
Switching unit on at any time will nulfify this setting.
8