Table of Contents
Advertisement
SETTING OVEN CONTROLS
Adjusting the oven temperature
Your appliance has been factory calibrated and tested to
ensure an accurate baking temperature. For the first few
uses, follow your recipe times and temperature
recommendations carefully. If you think the oven is cooking
too hot or too cool for your recipe times, you can adjust the
control so the oven cooks hotter or cooler than the
temperature displayed.
To adjust oven temperature
1. Press
.
2. Set the temperature to 550°F (287°C) by pressing and
holding the
keypad.
3. Within 2 seconds, press and hold
display appears. Release
now indicates the amount of degrees offset between
the original factory temperature setting and the current
temperature setting. If the oven control has the original
factory calibration, the display will read "0."
4. The temperature can now be adjusted up or down 35°F
(19°C), in 5°F increments by pressing and holding the
or
keypad. Adjust until the desired amount of
offset appears in the display. When lowering the oven
temperature, a minus sign (-) will appear before the
number to indicate that the oven will be cooler by the
displayed amount of degrees.
5. When you have made the desired adjustment, press
to go back to the time of day display.
NOTES
• Any oven temperature offset made will not affect the
broil or self-cleaning feature temperatures.
• If the oven display has been set to display Celsius,
adjustments made will be in 1°C increments with each
press of the
or
• DO NOT USE oven thermometers such as those found in
grocery stores to check the temperature settings inside
the oven. These oven thermometers may vary as much
as 20 to 40 degrees from actual temperatures.
20
until the 2 digit
keypad. The display
keypad.
Operating the oven light
The interior oven light will automatically turn ON when the
oven door is opened.
Press
to turn the interior oven light ON and OFF
whenever the oven door is closed.
The interior oven light is located at the upper left rear wall
of the oven interior and is covered with a glass shield held
by a wire holder. The glass shield must be in place
whenever the oven is in use.
To change the interior oven light, see "Changing the oven
light" in the Care & Cleaning section.
Advertisement
Table of Contents
