Table of Contents
Advertisement
Connecting Cables Through the Side Conduit
1.
Peel back the bottom flat gasket below the side conduit just enough to expose the security
screw.
2.
Use the Allen key supplied to loosen and remove the security screw (see below).
3.
Use a flat screwdriver to unscrew the conduit plug.
4.
Pull the cabling through the hole.
5.
Apply appropriate sealant around the opening to prevent moisture from entering the
housing.
security screw
Document 800-00023 Rev D
05/07
supplied
allen key
9
Advertisement
Table of Contents
