Toshiba Satellite C650D Series User Manual page 70

2. Remove all cables connected to the computer.
3. Turn the computer upside down and remove the battery pack (refer to
4. Remove one screw securing the memory module cover.
5. Lift off the cover.
■
Use a point size 0 Phillips screwdriver.
■
Insert the two memory modules of the same specifications and
capacity into Slot A and Slot B respectively. The computer will operate
in dual channel mode. You can access the inserted memory modules
efficiently in dual channel.
6. Insert the memory module into the connector on the computer. Press
7. Push the module down so that it lies flat and is secured by two
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
User's Manual
Replacing The Battery Pack
Figure 3-4 Removing the cover
the module carefully and firmly to ensure a solid connection.
latches.
Hardware, Utilities and Options
section in Chapter 6.)
3-18