Executing Sleep Mode - Toshiba Satellite C650D Series User Manual

■
When the AC adaptor is connected, the computer will go into Sleep
Mode according to the settings in the Power Options (to access it, Start
→ Control Panel → System and Security → Power Options).
■
To restore the operation of the computer from Sleep Mode, press and
hold the power button or any key on the keyboard for a short amount of
time. Please note that keyboard keys can only be used if the Wake-up
on Keyboard option is enabled within the HW Setup utility.
■
If the computer enters Sleep Mode while a network application is
active, the application might not be restored when the computer is next
turned on and the system returns from Sleep Mode.
■
To prevent the computer from automatically entering Sleep Mode,
disable Sleep Mode within the Power Options (to access it, Start →
Control Panel → System and Security → Power Options).
■
To use the Hybrid Sleep function, configure it in the Power Options.
Benefits of Sleep Mode
The Sleep Mode feature provides the following benefits:
■
Restores the previous working environment more rapidly than does the
Hibernation Mode feature.
■
Saves power by shutting down the system when the computer receives
no input or hardware access for the time period set by the System
Sleep Mode feature.
■
Allows the use of the panel power off feature.

Executing Sleep Mode

You can also enable Sleep Mode by pressing FN + F3 - please refer to
Chapter 5,
You can enter Sleep Mode in one of the following ways:
■
Click Start, point to the arrow icon (
Sleep from the menu.
■
Close the display panel. Please note that this feature must be enabled
within the Power Options (to access it, click Start → Control Panel →
System and Security → Power Options).
■
Press the power button. Please note that this feature must be enabled
within the Power Options (to access it, click Start → Control Panel →
System and Security → Power Options).
When you turn the power back on, you can continue where you left when
you shut down the computer.
User's Manual
The Keyboard, for further details.
Getting Started
) and then select
1-9