Legacy Usb Support - Toshiba Satellite C650D Series User Manual

2
* The optical disc drive will be used to start the computer when there is a
bootable disk contained in the drive.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer. When the
2. Use the up and down cursor keys to select boot device you want and
If a Supervisor Password has been set, manual boot device selection
functions may be restricted.
The boot device selection methods described above will not change the
boot priority settings that have been configured in HW Setup. In addition, if
you press a key other than one of those listed, or if the selected device is
not installed, the system will continue to boot according to the current and
available settings in HW Setup.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Sleep Mode, you can
turn on the computer by pressing any key. However, please be aware that
this option will only work with the internal keyboard and only when the
computer is in Sleep Mode.
Enabled
Disabled
USB

Legacy USB Support

You can use this option to enable or disable USB keyboard/mouse legacy
emulation so that, even if your operating system does not support USB
devices, you can still use a standard USB mouse and keyboard - to achieve
this you should set the appropriate option(s) to Enabled.
Enabled
Disabled
User's Manual
ing Innovation>>>
press ENTER.
screen appears, release the F12 key.
Enables the Wake-up on Keyboard function.
Disables the Wake-up on Keyboard function.
(Default)
Enables the USB KB/Mouse Legacy Emulation
function (Default).
Disables the USB KB/Mouse Legacy Emulation
function.
HW Setup and Passwords
TOSHIBA Lead-
7-4