KitchenAid Kitchen Aid KAR-19 Technical Education page 33

10. 18˝ Models Only: Remove the six screws
from the counterbalance plate and remove
the plate from the rear of the unit.
11. From the rear of the unit, remove the six
hex-head screws from the channel cover
and remove the cover.
12. Remove the four screws from the unit com-
partment cover and remove the cover.
Screw (1 of 6)
Counterbalance Plate
18
Channel Cover
(6 Screws)
Unit Compartment Cover
(4 Screws)
˝
Models
13. Cut the tie wrap from around the tubing
and wire harness inside the channel.
14. Remove the two screws from the reservoir
water trough and remove the trough.
Screw
Continued on the next page.
4-13
Tie Wrap
Screw
Water Trough