Removing The Electronic Control, Thermistor, And Power Supply Cord - Whirlpool Ad70Uss Manual

REMOVING THE ELECTRONIC CONTROL,
THERMISTOR, AND POWER SUPPLY CORD
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dehumidifier or disconnect power.
2. Remove the cabinet from the dehumidi-
fier (see page 3-2 for the procedure).
NOTE: The electronic control, thermistor, and
power supply cord are hard-wired together
and are serviced as an assembly.
Front View
3.
4.
Electronic
Control
Thermistor
Power
Supply
Cord
Bucket Switch
Power Supply Cord
3-4
Disconnect the four wire connectors from
the electronic control.
Electronic
Control
Black (Compressor)
Black (Fan Motor)
Remove the two hex-head screws from
the electronic control.
Electronic Control Screws
Rear View
Orange
White