2. MAJOR UNIT REPLACEMENT
2.4 Replacing the Panel PC Board
1)
Remove the side cover L from the printer. (Refer to Section 2.1.)
2)
Remove the PT-3x8 screw to detach the operation panel ass'y from the side cover L in the direction
indicated by the arrow.
Side Cover L
PT-3x8 Screw
3)
Disconnect the operation panel harness from CN2 on the panel PC board.
4)
Disconnect the flat cable from CN3 on the panel PC board.
Operation Panel Harness
2-6
2.4 Replacing the Panel PC Board
Operation Panel Ass'y
Flat Cable
CN2
CN3
EO18-33018