Table of Contents
Advertisement
Delay Wash
Select this option to run your dishwasher at a later time or
during off-peak hours.
You can delay the start of a cycle up to 5 hours.
To delay the start
1. Close the door.
2. Select a wash cycle and option.
Press the desired cycle. Turn the Cycle Control knob
clockwise to the number of hours you want the
dishwasher to delay the start.
DELAY glows. The dishwasher starts the cycle in the
selected number of hours. You can add items while the
time is counting down.
3. Close and latch the door. The Cycle Control knob will
not advance if the door is unlatched.
NOTE: Quick Rinse, Water Miser, and China/Light
cycles
cannot be delayed.
IMPORTANT:
Operate your dishwasher only when you are at home.
If your home is equipped with a water softener, do not
start the dishwasher during the regeneration of the
softener.
Cycle Status Indicator
Delay/Water Heat
If you delay a wash cycle, the indicator glows to indicate
the delay is set.
DELAY
WATER
HEAT
The Delay/Water Heat status indicator also glows when the
dishwasher heats water to the proper dishwashing
temperature.
This happens when your household water is
not hot enough.
NOTE: The Cycle Control knob pauses while the water
heats.
Drying System
During drying, you can see steam escaping through the
vent at the upper left corner of the door. This is normal as
the heat dries your dishes.
IMPORTANT: The vapor is hot. Do not touch the vent
during drying.
m
f,.
Overfill Protection Float
The overfill protection float (in the front right corner of the
dishwasher tub) keeps the dishwasher from overfilling. It
must be in place for the dishwasher to operate.
Check under the float for objects that may keep the
protector from moving up or down.
17
Advertisement
Table of Contents
