Download  Print this page

Voice Control - Apple iPhone 3GS A1325 User Manual

For ios 7 (october 2013).
Hide thumbs


new line
cap—to capitalize the next word
caps on ... caps off—to capitalize the first character of each word
all caps—to make the next word all uppercase
all caps on ... all caps off—to make the enclosed words all uppercase
no caps on ... no caps off—to make the enclosed words all lowercase
no space on ... no space off—to run a series of words together
smiley—to insert :-)
frowny—to insert :-(
winky—to insert ;-)

Voice Control

Make phone calls and control music playback with Voice Control. (On iPhone 4s or later, you can
also use Siri to control iPhone by voice. See Chapter 4, Siri, on page 40.)
Note: Voice Control and Voice Control settings aren't available when Siri is turned on.
Use Voice Control. Turn Siri off in Settings > General > Siri, then press and hold the Home button
until the Voice Control screen appears and you hear a beep, or press and hold the center button
on your headset. See
Use an Apple headset
For best results:
Speak clearly and naturally.
Say only Voice Control commands, names, and numbers. Pause slightly between commands.
Use full names.
Change the language for Voice Control. By default, Voice Control expects you to speak voice
commands in the language that's set for iPhone (in Settings > General > International >
Language). To use Voice Control in another language or dialect, go to Settings > General >
International > Voice Control.
Voice Control for the Music app is always on, but you can prevent voice dialing when iPhone
is locked. Go to Settings > Settings > General > Touch ID & Passcode (iPhone 5s) or Settings >
General > Passcode Lock (other models), and turn off Voice Dial.
For specific commands, see
more about using Voice Control, including information about using Voice Control in different
languages, see
Chapter 3
on page 34.
Make a call
on page 43 and
Siri and Voice Control
on page 63. For


Table of Contents

   Related Manuals for Apple iPhone 3GS A1325

Comments to this Manuals

Symbols: 0
Latest comments: