Personal Injury Hazard
Use care If vacuum cleaner Is placed
on stairs. If it falls, personal injuryor
property damage could result.
Guide either side or the front of the nozzle
along a baseboard. The full length brushes
help remove trapped dirt at carpet edges.
Put handle in ful! upright position.
crevice tool or dusting brush. Set the On/Off
switch to ON.
This vacuum has a thermal protector which
trips to protect the vacuum
If a clog prevents the
normal flow of air to the motor, the thermal
protector turns the motor off automatically
allow the motor to cool in order to prevent
possible damage to the vacuum.
To correct problem: If this occurs, turn the
vacuum off and unplug the power cord from
the outlet to allow the vacuum to cool and
the thermal protector to reset. Check for
and remove clogs, if necessary. Also check
and clean/replace any cloggedfilters. Wait
approximatelythirty (30) minutesand plug
the vacuum in and turn back on to see ifthe
motorprotector has reset. The motor
protectorwill not reset if the vacuum is not
tumed off even if the vacuum has cooled
When the unit is running
flow, the light on the performance
is off. The light comes
If that occurs,
check the dust bin, clean/replace
filters, and check other possible
shown in CLOG
To correct problem: See the TROUBLE-
also come on