This Owner's Guide provides specific operating instructionsfor
your model. Use the unit only as instructed in this Owner's Guide.
Before starting the appliance, follow these important first steps.
Choose a place that is near a grounded electrical outlet. Do
Not use an extension cord or an adapter
If possible, place the refrigerator
out of direct sunlight and
away from the range, dishwasher or other heat sources.
must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
water supply availability
with an automatic
DO NOT install the refrigerator
will drop below
55°F (13°C) or rise above |IO°F (43°C).
will not be able to maintain
inside the refrigerator.
DO NOT block the foe grille
on the lower front of your
Sufficient air circulation
is essenflal for the
to allow easy access
to a counter when removing
food. To make this possible,
in which the doors open can be reversed. See
Door Removal & Reversal Instructions.
If your refrigerator
with the door hinge side
a wall, you may have to allow additional
so the door can be opened wider.
All four corners of your refrigerator
must rest firmly on a
solid fioon Your refrigerator
front rollers or front leveling
screws to help level your unit.
To Level Your Refrigerator:
Remove toe grille.
2. Use fiat-blade .
rollers, to U se
If you install your refrigerator
in a garage
area, you may experience
months when temperatures
dip below 55 ° F.
with a Garage
Kit will lower
of your unit to 34°F.
This kit can be ordered
Sears stores or Sears
Parts & Repair at an additional
Allow the following clearances for ease of installation,proper
air circulation, and plumbing and electrical connections:
Sides & Top
Raise the front of the refrigerator
enough so the doors
close freely when opened halfway.
should slope 1/4" to 1/2" from front to back. Then level the
from side to side.
If you see black coils/tubing
on the back of your
leave 3" clearance
top of refrigerator.