Times - Kenmore 665.61639 Use & Care Manual

USING AUTO COOK
You can cook microwavable foods just by choosing
a category and quantity• AUTO COOK has preset
times and cook powers for 5 categories (see chart
below)•
To use AUTO COOK, follow the steps below:
1. TOUCH
3. Touch a Number pad to enter the quantity•
Example
for 1 cup (250 mL}
YOU SEE
Example
for 1 cup (250 mL)
once
YOU SEE
4. TOUCH
2. Touch AUTO COOK 1 to 5 times to choose the
type of food•
Example
for rice
OR once
Touch a Number pad to choose the type of
food.
_ Example
for canned
vegetables
YOU SEE
Example
for canned
vegetables
YOU SEE
(countdown time
may vary)
NOTES:
• If you do not enter a quantity within 2 seconds,
AUTO COOK will prompt you to choose a
quantity• You then have 1 minute to enter a
quantity and to touch START/ENTER. If you do
not do so, AUTO COOK will be canceled•
• If you touch AUTO COOK 6 times, the display
returns to the Rice setting•
• If you need more or less time, do not touch
AUTO COOK again• Touch POWER before you
touch START/ENTER. (See "Changing preset
cooking times" in the "Getting to Know Your
Microwave Oven" section•)
• When cooking bacon, keep in mind that
differences in the amount of fat, meat, thickness,
and curing process will affect how bacon is
cooked• Also, regular sliced bacon averages
about 16 slices per pound (454 g).
Thischartshowsyouhowtochooseatypeoffoodandtheamountsyoucanchooseforeachtype.
TOUCH OR TOUCH AMOUNTSYOU
FOOD AUTO COOK* NUMBERPAD CAN CHOOSE
Rice once 1 0.5 to 2 cups**
(sensor) (125 mL to 500 mL)
Canned Vegetables twice 2 1 to 4 cups (250 mL to 1 L)
Bacon 3 times 3 1 to 6 pieces, average thickness
Cereal (instant) 4 times 4 1 to 4 servings
French Toast (frozen) 5 times 5 1 to 4 pieces
* You must touch AUTO COOK once before choosing the food type.
** Because this food is cooked by the sensor, you don't need to enter a quantity. The amount shown here is the amount you can
cook. After you choose the food type and touch START/ENTER, "SENSE" appears on the display. Also, the sensor needs 2 minutes,
30 seconds to warm up after the oven is connected to power or after a power failure. If you start sensor cooking during the warm-up,
"SENSE" shows on the display until the warm-up is over. Microwave energy will not be turned on until the sensor is warm.
23