Clock; Timer - Kenmore 911.30425 Use & Care Manual

OVEN CONTROL
CANCELS BAKE,
BROIL OR
CLEAN OPERATION
PROGRAM
STATUS
DISPLAY
CLOCK /
TIMER
DISPLAY
I
TEMPERATURE
DISPLAY
FUNCTION
DISPLAY
UP ARROW PAD
(INCREASES TiME
OR TEMPERATURE)
PRESS TO TURN
TIMER ON AND OFF
Lm
T
SET AUTOMATIC
OVEN OPERATIONS
DOWN ARROW PAD
(DECREASES TiME
OR TEMPERATURE)
Your oven is controlled with a touch. You now have the
ease of setting the following operations:
CLOCK TIMER
BAKE DELAY BAKE
BROIL CLEAN
DELAY CLEAN
The UP or DOWN arrow is used to set an amount of time
or change the temperature you want to use. By pressing
and holding down either pad the numbering will change
quickly. By pressing and releasing either pad the
numbering will change slowly.
DISPLAY:
Once you have programmed your control for any
operation, you can display the setting by pressing the
appropriate pad. For example, if you are using the
TIMER and want to see the time of day, press CLOCK.
The display will show the time of day.
TONES:
The end-of-cycle tone will sound at the end of timer use
and automatic oven functions° The end-of-cycle tone is
3 short beeps followed by 1 beep every 6 seconds that
repeat until you press any operation. If you would like
to eliminate the repeating beeps, push and hold CLEAR/
OFF for ten seconds. To return the 1 beep every 6
seconds, push and hold CLEAR/OFF for 10 seconds.
To cancel the end-of-cycle tone, press any key except
the UP or DOWN arrow key.
F.CODE:
If the time display beeps continuously and flashes an
"F" followed by a number, you have a function error
code. Note the number after the "F". Press CLEAR/
OFF. Allow oven to cool for I hour. If problem repeats,
disconnect all power tO the range and call for service_
Advise your service technician of the number following
the "F" in the display.
PRESS
NOTE:
You cannot set BAKE, BROIL or COOK
TIME while the oven door is in the locked
position, if you try, the word"DOOR" will
appear in the display. The oven door
lock is to be used for Self.Cleaning only,
6 NCERC26