Left Side and Right Side Panels
Attach Cabinet Left and Right Side Panels to the Cabinet Base using 6 Phillips Head Bolts
Do not fully tighten bolts at this time.
Install Cabinet Front Panel and LP Tank Bracket
Attach Cabinet Front Panel to the Cabinet Left and Right Side Panels using 4 Washer Head Bolts
at the top and bottom holes.
Attach Front Panel so that end with center hole aligns with
hole on bottom of Cabinet Base.
Attach Cabinet Front Panel to the Cabinet Bottom Panel using 1 Phillips Head Bolt (M6xlOmm).
Ensure cabinet is square, and tighten all bolts.
Attach the LP Tank Bracket to the Cabinet Front Panel using 2 Washer Head Bolts (M4xlOmm)
center holes as shown.
LP Tank Bracket