Inserting Bobbin - Kenmore 385.11206300 Owner's Manual

• Inserting bobbin
Place a bobbin in the bobbin case, making sure the
thread feeds clockwise from the bobbin.
Draw the thread through the slot of the case.
[] Continue to draw the thread under the tension spring Q
and through the opening.
Pull out about 4" (10 cm) of thread.
(_) Tension spring
[] Holding the latch open, position the bobbin case into the
shuttle, and then release the latch.
[] The case should lock intothe place when the latch is
released.
%
[]
[]
I
..J
.F
2O