Crisper Humidity Control; Chilled Meat Drawer; Wine Or Can/Bottle Rack; Utility Or Egg Bin - Kenmore Top-mount Refrigerator Use & Care Manual

Top-mount refrigerator
Hide thumbs Also See for Kenmore Top-mount Refrigerator:
Table of Contents

Advertisement

Available languages

Available languages

Crisper Cover
To Remove the Crisper(s) Cover:
1. Remove crisper(s). Hold the glass insert firmly with one hand
and press up in the center of the glass insert until it rises
above the plastic frame. Carefully slide the glass insert
forward to remove.
2. Lift the cover frame and remove it.
To Replace the Crisper(s) Cover:.
NOTE: Before reinstalling the cover, make sure the U-shaped
reinforcement bar is reinstalled in the front edge of the crisper
cover.
1. Fit back of cover frame into supports on side walls of the
refrigerator and lower the front of the cover frame into place.
2. Slide rear of glass insert into cover frame and lower front into
place.
Meat Drawer Cover
To Remove and Replace the Meat Drawer Cover:.
1. Remove the meat drawer. Tilt up the front of the cover and lift
at the back. Pull the cover straight out.
2. Replace the cover by guiding the rear hooks into the shelf
supports. Tilt the cover up at the front until the rear hooks
drop into the slots. Lower the front of the cover to a level
position and replace the meat drawer.
The Humidity Control is located on the crisper drawer. You can
adjust the amount of humidity in the moisture-sealed
crisper
using the settings between HIGH and LOW.
LOW (open) lets moist air out of the crisper for best storage of
fruits and vegetables with skins.
Fruit: Wash, let dry and store in refrigerator in plastic bag in
crisper. Do not wash or hull berries until they are ready to use.
Sort and keep berries in original container in crisper.
Vegetables with skins: Place in plastic bag or plastic
container and store in crisper.
HIGH (closed) keeps moist air in the crisper for best storage of
fresh, leafy vegetables.
Leafy vegetables: Wash in cold water, drain and trim or tear
oft bruised and discolored areas. Place in plastic bag or
plastic container and store in crisper.
Humldlly _Htrol
moQeooQeo
_w
The chilled meat drawer temperature control is located on the
left-hand side of the meat drawer cover. Slide the meat drawer
temperature control forward to make the meat drawer less cold
or backward to make the drawer more cold.
Meat Storage Guide
Store most meat in original wrapping as long as it is airtight and
moisture-proof.
Rewrap if necessary. See the following chart for
storage times. When storing meat longer than the times given,
freeze the meat.
Fresh fish or shellfish ......................... use same day as purchased
Chicken, ground beef, variety meats (liver) ...................... 1-2 days
Cold cuts, steaks/roasts
...................................................
3-5 days
Cured meats ...................................................................
7-1g days
Leftovers - Cover leftovers with plastic wrap, aluminum foil, or
plastic containers with tight lids.
e Rack
To Remove and Replace the Wine Rack (left) or Can/Bottle
Rack (right):
1. Remove the rack by pulling it straight out from the shelf.
2. Replace the rack by sliding it in between the shelf and the
wall of the refrigerator.
L
o' s;;;gg' " I:I
Depending on your model, you may have a one, two or three
piece bin. Eggs may be stored in the egg tray or loose in the bin.
NOTE: Store eggs in a covered container for long-term storage. If
your model does not have an egg storage bin, store eggs in their
original carton on an interior shelf.
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite 106. series

Table of Contents